Filter
Top Products
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 25
Making/Answering Calls
Making calls
Using the handset
1 Lift the handset.
LThe prime line (see “Prime line” on
page 51) is automatically selected
and the line indicator lights.
LThe display shows the length of
the call.
2 Dial the phone number.
LThe dialed number is displayed. If
you dial a phone number longer
than 15 digits, all the digits will be
shifted to the left side.
3 When you finish talking, place the
handset on the cradle.
LThe line indicator goes out.
LThe length of the call will remain
on the display for a few seconds.
N
o
t
e:
LThe line indicator flashes while
another phone is using the line.
Using the speakerphone
1 Press {SP-PHONE}.
LThe SP-PHONE indicator lights.
LThe prime line (see “Prime line” on
page 51) is automatically selected
and the line indicator lights.
LThe display shows the length of
the call.
2 Dial the phone number.
LThe dialed number is displayed. If
you dial a phone number longer
than 15 digits, all the digits will be
shifted to the left side.
LIf you misdial, press {SP-PHONE}
and start again from step 1.
3 When you finish talking, press
{SP-PHONE}.
LThe SP-PHONE and the line
indicators go out.
LThe length of the call will remain
on the display for a few seconds.
N
o
t
e:
LThe line indicator flashes while
another phone is using the line.
LUse the speakerphone in a quiet
environment.
LIn step 1, you can select a line by
pressing a line button with an unlit
indicator instead of pressing
{SP-PHONE}. Be sure that the
handsfree mode is set to
“Speakerphone” (see “Handsfree
mode” on page 51).
Switching between handset and
speakerphone
Switching from handset to
speakerphone
Press {SP-PHONE}, then place the
handset on the cradle.
Switching from speakerphone to
handset
Lift the handset.
Adjusting the handset volume (5
levels) or speaker volume (8 levels)
Press {-} or {+} repeatedly while
talking.
Redialing the last number dialed
1 Lift the handset or press
{SP-PHONE} or a line button.
2 Press {REDIAL/PAUSE}.
Making a call using the redial list
The last 6 phone numbers dialed are
stored in the redial list.
1 Press {REDIAL/PAUSE}.
2 Press {V} or {^} to select the
desired number.
3 Lift the handset or press
{SP-PHONE} or a line button.