Filter
Top Products
Making/Answering Calls
26
For assistance, please visit http://www.panasonic.com/phonehelp
Erasing a number in the redial list
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {REDIAL/PAUSE}.
2 Press {V} or {^} to select the
desired number, then press
{ERASE}.
3 Select “Yes?”, then press {ERASE}
or {MENU/SET}.
LTo cancel, select “No?”, then press
{MENU/SET}.
4 Press {REDIAL/PAUSE} to return to
standby mode.
N
o
t
e:
LTo return to the previous menu, press
{<}.
PAUSE button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed (see
“Chain dial” on page 34).
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1 Lift the handset or press
{SP-PHONE} or a line button.
2 Press {9}, then press
{REDIAL/PAUSE}.
3 Dial the phone number.
N
o
t
e:
LA 3.5 second pause is inserted each
time {REDIAL/PAUSE} is pressed.
Press repeatedly to insert longer
pauses.
Answering calls
When a call is being received, the unit
rings and the called line indicator flashes
rapidly.
Using the handset
1 Lift the handset.
2 When you finish talking, place the
handset on the cradle.
Using the speakerphone
1 Press {SP-PHONE}.
2 Speak into the MIC.
3 When you finish talking, press
{SP-PHONE}.
N
o
t
e:
LIn step 1, you can also answer the call
by pressing the flashing line button. Be
sure that the handsfree mode is set to
“Speakerphone” (see “Handsfree
mode” on page 51).
Adjusting the ringer volume (4 levels)
Press {-} or {+} repeatedly when in
standby mode.
Turning ringer on/off
Turn the ringer on/off for each line.
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Advanced Setup”, then
press {MENU/SET}.
3215555
Erase
Yes?