Filter
Top Products
84
If the Following Appear on Your Display...
The following will be displayed on the handset when the unit needs your attention.
Display message Cause & Remedy
Recharge battery
• The battery needs to be charged. Recharge the
battery (p. 16).
Charge for 6 HRS
• The battery has been discharged. The handset will
not work. Fully charge the battery (p. 16).
No link to base.
Move closer to
base and try
again.
• The handset has lost communication with the base
unit. Walk closer to the base unit, and try again.
• Confirm the base unit’s AC adaptor is plugged in.
• Raise the base unit antennas.
• The handset’s registration may have been canceled.
Re-register the handset (p. 64).
Please lift up
and try again.
• A handset button was pressed while the handset was
on the base unit. Lift the handset and press the
button again.
Busy
• The called base unit is in use.
• The base unit user is using the line(s). Wait until the
line status icon goes out.
Error!!
• When you tried to re-register the handset, the
handset and base unit could not link for some reason,
such as interference from electrical appliances. Move
the handset and base unit away from any electrical
appliances and try again.
System is busy.
Please try again
later.
• The Answering System is in use (answering a call or
playing back messages). Try again later.
• The handset has lost communication with the base
unit. Walk closer to the base unit and try again.
Phone book full
• When you tried to store an item in the phone book,
the phone book memory was full. Press [OFF] to exit
programming mode. To erase other items from the
phone book, see page 50.