Filter
Top Products
Useful InformationAnswering SystemTelephone System
21
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Line Mode
The line mode for both lines is preset to “B” and generally should not be adjusted. If
the line buttons on the base unit do not light properly, or the line status icons (
and
) are not displayed on the handset properly, the line mode selection is
incorrect. Set line mode to
“A”
. Each line has its own setting.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Scroll to “Set line mode” by pressing [d]
or [B], then press the soft key ( ).
5 Press [d] (Line1) or [B] (Line2) to select
the line.
6 Select “A” or “B” by pressing [d] or [B].
7 Press the soft key ( )
• To select the other line, repeat from step 4.
8 Press [OFF].
Handset
L1
L2
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set line mode
Set line mode
d
=Line1
B
=Line2
Set line mode
Line1:B
SAVE