Filter
Top Products
32
Making Calls
Using the Handset
System capabilities
2 outside calls can be handled simultaneously on separate telephone lines by
the handset and the base unit.
1 Press [C].
• A free line is automatically selected
and the line is displayed. (To change
the line selection, see page 62.)
• You can select a line by pressing a
line soft key ( ) or ( ),
instead of pressing [C].
• “Talk” is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
3 To hang up, press [OFF] or place
the handset on the base unit.
• The line status icons ( and ) show the status of each line (p. 9).
• While using the handset, the IN USE indicator lights on the base unit.
To have a hands-free phone conversation
1
Press [s].
• A free line is automatically selected and the line is displayed.
(To change the line selection, see page 62.)
• “SP-phone” is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will show the length of the call.
3 When the other party answers, talk into the microphone.
4 To hang up, press [OFF] or place the handset on the base unit.
Handset
LINE1 LINE2
[C]
[s]
[HOLD/INTERCOM]
[REDIAL/
PAUSE]
[B], [d]
[OFF]
Soft Key
()
LINE1
Microphone
Soft Key
()
LINE2
L1 L2