Filter
Top Products
Useful InformationAnswering System
Preparation
55
Transferring a Call
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
Quick call transfer
You can transfer a call without waiting for the paged party to answer.
From the to the
1. During a call, press [HOLD/INTERCOM].
2. Press [0].
3. Press [OFF] to hang up.
From the to the
1. During a call, press [LOCATOR/INTERCOM/TRANSFER].
2. Press [SP-PHONE] to hang up.
• The call will be transferred directly.
• The paged party can answer the transferred call:
— for the handset, press [
C], [s], or the line soft key ( ) or ( ).
— for the base unit, press [SP-PHONE] or the line button.
• After the paged party answers, the transfer is complete.
• If the paged party does not answer:
— for the handset, press the line soft key ( ) or ( ) to return to the
outside call.
— for the base unit, press the line button that is flashing to return to the outside
call.
• If the paged party does not answer within 60 seconds after you hang up, your
phone will ring and the call will be returned to your phone. You may speak to the
caller again by pressing the line soft key ( ) or ( ) on the handset, or
the line button on the base unit.
If you do not answer the call within 4 minutes, the call will be disconnected.
After speaking to the caller, the handset user can also transfer the caller to the
Answering System by performing the following steps:
(1) Press [HOLD/INTERCOM] on the handset.
(2) Press [9] to transfer the caller to the Answering System greeting (p. 73).
(The caller will hear the greeting and can leave a message after the beep.)