Filter
Top Products
2.4 During a Conversation
74
Operation
•
If you misdial,
press the FLASH button and then dial the extension or telephone number
again <for PT>.
•
If you want to talk to the caller again
before the transfer destination extension/party
answers, press the TRANSFER button again or press the corresponding INTERCOM/CO/
PDN/SDN button <for PT>; or press the switchhook again <for SLT>.
• You can transfer a call to a busy extension. The call is transferred to the busy extension
when it becomes free
(Camp-On Transfer)
.
•
If you hear an alert tone
within a specified period of time (Transfer Recall Time) after
transferring a call, the destination extension does not answer the call or remains busy
(Transfer Recall)
. Please go off-hook to answer the call. This does not happen when you
transferred the call to one of the following destinations; Remote Resource, UCD Group or
External Party.
• After transferring the call to an external party, you can join the call by pressing the CO button
which you used to transfer the call. A three-party conversation is established
(Conference)
.
•
If a call between two external parties is established,
both parties will hear an alert tone
15 seconds before the time limit (Default: 10 min) runs out. The original extension will hear
an alarm 50 seconds before the time runs out.
• You can transfer a call to another extension simply by pressing the DSS button associated
with the transfer destination extension
(One-Touch Transfer)
. You do not have to press the
TRANSFER button.
• The call will be released from your extension automatically after dialling the destination
extension number
(Released Link Operation)
.
If this feature is enabled by System Programming, you can perform another operation
without going on-hook after transferring the call.