General Features
Features Guide 231
• If more than one call is ringing on an extension, Call Pickup to that extension works for the
first arrived call.
• Call Waiting Call
This feature does not apply to a call waiting call.
[CO Line]
• Tenant Service
If "Tenant Service" is utilized, this feature is only available for an outside call ringing on
an extension within the same tenant.
• If more than one CO call is ringing on an extension, Call Pickup starts with the first arrived
CO call.
• Call Waiting Call
This feature does not apply to a call waiting call.
[Deny]
• This feature does not apply to calls coming in on multiple extensions simultaneously.
• Applicable calls
This feature applies to the following calls.
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
• An extension user in "Call Pickup Deny" mode can pick up calls ringing at another
extension.
Programming Guide References
• 2.3 Numbering Plan
– CO Call Pickup
– Group Call Pickup
– Directed Call Pickup
– Dial Call Pickup Deny Set / Cancel
•2.8SystemOption
– Confirmation tone for Call Pickup, Paging, Paging- Answer, TAFAS-Answer, Hold
Retrieve and Call Park Retrieve
– Special dial tone after setting feature
• 3.3 Extension Group
• 4.3 Extension Line
– Call Pickup Deny
Call Type
Outside calls Direct In Line (DIL) 1:1;
Direct Inward System Access (DISA);
TIE
Intercom calls Calls ringing on a single extension
