A SERVICE OF

logo

General Features
Features Guide 145
Notes
Overflow destination
One of the following five destinations can be assigned as the Overflow destination per
UCD Group: an extension, other Extension Groups, other Incoming Groups (except DIL
1:N Group), Phantom Extension or TAFAS (outside calls only).
If the overflow destination or UCD Time Table is not programmed, the call is put in the
waiting queue. Then if not answered within a specified period of time (Intercept time),
the call will be transferred to the IRNA destination.
(4) UCD Time Table
If all extensions in a UCD group are busy, the incoming CO calls will be handled by the UCD
Time Table procedure.
Up to 32 UCD Time Tables, max. 16 steps for each, can be assigned by System Programming.
The following commands are provided to make up a UCD Time Table procedure.
All Logout
Intercept Destination
is not programmed.
Waiting Queue
"Calls to Empty Group"
are allowed.
"Calls to Empty Group"
are not allowed.
Outside calls Intercom calls
Transferred
intercom calls
Transferred
outside calls
Disconnected
Cannot be transferred
Overflow
Destination
is not idle.
Overflow
Destination
Intercept
Destination
Intercept Destination
is programmed.
(Immediately)
See previous page,
"All Busy."
Overflow Destination
is not programmed.
Overflow Destination
is programmed.
Overflow
Destination
(Immediately)
Overflow
Destination
is programmed.
Overflow
Destination is
not programmed.
(Immediately)
Overflow
Destination
is idle.