Filter
Top Products
2.7 Setting the Telephone According to Your Needs
130
Operation
2.7.14 Clearing the Feature Settings at Your Extension
(Station Programme Clear)
You can clear the following features which have been set on your phone. If you change desks, and
notice settings which a previous owner left on the line, you can clear these features.
• Calling to a Pre-set Party by Going Off-Hook
(Pickup Dialling)
: The stored number will be
cleared.
• Reserving a Busy Line
(Automatic Callback Busy)
• Leaving a Message Waiting Indication
(Message Waiting)
: All messages will be removed.
• Forwarding Your Calls
(Call Forwarding)
• Showing an Absent Message on the Caller's Telephone Display
(Absent Message Capability)
• Leaving an Extension Group
(Log-In / Log-Out)
• Calling Using the Call Log
(Incoming Call Log)
• Setting the Alarm
(Timed Reminder)
• Refusing Incoming Calls
(Do Not Disturb [DND])
• Receiving a Call Waiting
(Call Waiting / Off-Hook Call Announcement (OHCA) / Whisper
OHCA)
• Denying the Paged Announcement
(Paging — Deny)
• Denying Other People the Possibility of Picking up Your Calls
(Call Pickup Deny)
• Denying Other People the Possibility of Joining Your Conversation
(Executive Busy Override
Deny)
• Turning on the Background Music
(BGM)
• Protecting Your Line against Indication Tones
(Data Line Security)
• Setting the Parallel Connected Telephone Ringer
(Parallelled Telephone Connexion)
: The
Single Line Telephone will not ring.
• Using the same Extension Number and the Setting of Your Previous Extension
(Walking
Station)
Off-hook.
On-hook.
Dial 790.
PT / SLT
C.Tone
7 9 0
T7531
On-hook.
C.Tone
Rotate Jog Dial until
"STA Prog Clear"
is displayed.
Press MODE until
"Feature Access"
is displayed.
STA Prog Clear
Press "SELECT."
SELECT MODE
→
MODE