Filter
Top Products
81
Chapter 6Multi-Unit User Operations
Selecting the Base Unit Access
Automatic base unit access (Auto)
The handset automatically selects a registered base unit.
•When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
•If the handset is in the overlap area between several base unit radio areas, the handset will access
the nearest base unit.
Specified base unit access
You can select one registered base unit (1 to 4) you desire to operate.
•You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is Auto (automatic base unit access).
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Select Base”, then press .
•The current setting, “Auto” or a
registered base unit number is at the
arrow.
4 Press or to select the desired
base unit.
5 Press .
•A beep sounds and the handset will return
to the standby mode.
•The selected base unit number will be
displayed.
•You can exit the programming mode any time
by pressing .
Select Base
H
Auto
Base 1
KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 81