Filter
Top Products
65
Chapter 5
Answering System
Summary of Answering System Operations
See corresponding pages for function details.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
<Standby mode>
Base 1 [A]
4 Messages
0 New Calls
Press (INT) then .
• lights and voice guidance is heard from the speaker.
•Message information is displayed for 2 seconds, then function menu is displayed.
•A brief voice guidance indicates the number of new message received, then you can hear
“Press 4 to playback new messages” and “Press 5 to playback all messages.”
* These functions are available only during incoming/memo message playback.
** This function is available only during your own greeting message playback.
•If each operation procedure is not completed within 30 seconds, the display will return to the stanby
mode.
<Function menu>
Repeat Msg*·················To repeat an/a incoming/memo message during playback (p. 71)
Skip Msg* ······················To skip an/a incoming/memo message during playback (p. 71)
Receiver Volume
········To select the receiver volume during playback (p. 73)
Play New Msg ············To playback new incoming/memo message(s) (p. 69)
Play All Msg ············To playback all incoming/memo message(s) (p. 69)
Play OGM························To playback a greeting message (p. 13, 68)
Record ····························To record a greeting/memo message (p. 67, 70)
Answer ON ····················To set the answering system ON (p. 13, 68)
Stop ··································
To stop the answering system operation (p. 71)
Answer OFF ··················To set the answering system OFF (p. 13, 68)
Erase One Msg* ········To erase one incoming/memo message (p. 69)
Erase All Msg··········To erase all incoming/memo message(s) (p. 70)
Erase OGM** ··················To erase the recorded greeting message (p. 68)
KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 65