Filter
Top Products
72
Answering System Operations
Recording Your Telephone Conversation Using the
Handset
You can record a telephone conversation.
1 During a conversation, press then
.
•“Recording” is displayed on the handset.
2 Continue your conversation.
3 When finished, press then .
•When you record your 2-way telephone
conversation, you should inform the other
party that the conversation is being recorded.
•A beep sounds every 15 seconds.
Setting the VOX SENS Function
The VOX SENS function is preset is 1 (HIGH). If the unit continues to operate after a caller hangs up
or there are long pauses between or after messages, set to 2 (LOW).
1 Press .
2 Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3
Press .
•“Remote Operation” is displayed on
the handset.
5
Press .
6 To set to LOW, press .
OR
To set to HIGH, press .
•The setting is displayed.
7 Press .
•The display will return to “Setting
Base”. To return to the standby mode,
press .
1
2
7
KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 72