Filter
Top Products
41
Chapter 3
Programmable Function on the Handset
Time Alarm
The handset will sound an alarm at a preset time for 30 seconds just for once or repeated daily. You
can also select the ringer type for time alarm (p. 42). If you select the melody for time alarm, the
handset will sound longer (It depends on the ringer type). You must set the date and time before
setting the alarm time.
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Time Alarm”, then press .
4 Press or until the arrow points
to “Set Alarm Time”, then press .
•The current setting is displayed on the 2nd
line.
<Enter Time>
-
:
--
5 Enter the desired time (hour and minute)
using a 4-digit number (24-hour time),
then press .
Ex: To set 06:30, enter “0630”.
6 While “Save” is at the arrow, press .
7 Press or to select “Once” or
“Repeat Daily”.
8 Press .
•A beep sounds.
•The display will return to “Time Alarm”.
To return to the standby mode, press
or wait for 60 seconds.
<Enter Time>
06:30
Setting the Alarm Time
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1 Follow steps 1 to 3 on Setting the Alarm
Time.
2 Press or until the arrow points
to “Alarm ON/OFF”, then press .
Setting the Time Alarm OFF
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
3 Press or to select “OFF”, then
press .
•A beep sounds.
•The display will return to “Time Alarm”.
To return to the standby mode, press
or wait for 60 seconds.
KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 41