Filter
Top Products
Answering System Operations
68
To erase your own greeting
message with function menu
1
During playback your own greeting
message, press .
2 Press or until the arrow points
to “Erase OGM”, then press .
3 Press or to select “Yes”, then
press .
•A recorded your own greeting message is
erased.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
To erase your own greeting
message with direct command
1 During playback your own greeting
message, press .
2 Press then .
•A recorded your own greeting message is
erased.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
6
To set the answering system
ON/OFF
See basic answering system operations
(p. 13).
1 Press (INT) then .
2 Press to set ON, or press to set
OFF.
•“[A]” is displayed if set to ON.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
0
8
To playback your own greeting
message
1 Press (INT) then .
2 Press or until the arrow points
to “Play OGM”, then press .
OR
Press .
•A recorded your own greeting message is
played back.
•If your own greeting message is not
recorded, one of 2 pre-recorded greeting
messages is played back.
•The display will return to “Remote
Operation”. To return to the standby
mode, press or wait for 30
seconds.
6
KX-TCD725EM-4(65~85) 01.10.24 14:39 Page 68