30
1 Press to enter the phonebook.
•The first caller information is displayed.
2 Press or until the arrow points
to the caller information you desire to
edit.
•You can also find a name by initial (p. 31).
3 Press .
4 While “Edit” is at the arrow, press .
•If you do not need to change the name, go
to step 6.
5
Edit the name up to 16 characters with
the dialling buttons, , or
(p. 27).
C
6 Press .
•If you do not need to change the number,
go to step 8.
7 Edit the number with the dialling buttons
, or .
•Pressing erases the digit to the left of
the cursor. To erase all digits, press and
hold .
8 Press .
9 Press or to select the desired
category number 1 to 9 or OFF, then
press .
10 While “Save” is at the arrow, press .
•A beep sounds and “Saved” is displayed.
•To return to the standby mode, press
or wait for 60 seconds.
C
C
C
Editing a Caller Information in the Phonebook
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
4 Press or until the arrow points
to “Clear”, then press .
•“Clear ?” is displayed.
5 Press or to select “YES”, and
press .
•A beep sounds and “CLEARED” is
displayed.
•After a few seconds, the display will show
the next caller information.
•To return to the standby mode, press
or wait for 60 seconds.
Clearing a Caller Information in the Phonebook
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1 Press to enter the phonebook.
•The first caller information is displayed.
2 Press or until the arrow points
to the caller information you desire to
clear.
•You can also find a name by initial (p. 31).
3 Press .
H
Edit
Clear
Reg. To Hot Key
Phonebook
KX-TCD725EM-2(24~37) 01.10.24 14:37 Page 30