Filter
Top Products
44
Tone Option
Setting the Key Tone ON/OFF
You can choose whether or not the handset keys will sound (key tone, confirmation tone, error tone).
The factory preset is ON.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
5
Press or to select “ON” or “OFF”.
6 Press .
•If ON is selected, a beep sounds.
•The display will return to “Key Tone
ON/OFF”. To return to the standby mode,
press or wait for 60 seconds.
1 Press .
2
Press
or
until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Tone Option”, then press .
4 While “Key Tone ON/OFF” is at the
arrow, then press .
•The current setting is at the arrow.
•You can exit the programming mode any time
by pressing .
Setting the Call Waiting Tone ON/OFF
If an incoming call has been received during an intercom between handsets, a call waiting tone
sounds. The factory preset is ON.
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
1 Press .
2 Press or until the arrow points to
“Setting Handset”
, then press .
3 Press or until the arrow points to
“Tone Option”
, press .
4 Press or until the arrow points to
“Call Waiting”
, then press .
•The current setting is at the arrow.
5
Press or to select “ON” or
“OFF”
.
6 Press .
•A beep sounds.
•The display will return to “Call
Waiting”. To return to the standby
mode, press or wait for 60
seconds.
•You can exit the programming mode any time
by pressing .
KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 44