Filter
Top Products
40
Changing the 4-digit Handset PIN
You can program a 4-digit handset PIN (Personal Identification Number). The factory preset is 0000.
Changing the PIN may prevent the unauthorised use of your unit by another person.
Handset PIN
1 Press .
2 Press or until the arrow points
to “Setting Handset”, then press
.
3 Press or until the arrow points
to “Other Option”, then press .
4 Press or until the arrow points
to “Change Hset PIN”, then press
.
5 Enter the current 4-digit handset PIN.
•The factory preset is 0000.
6 Enter the new 4-digit handset PIN
TWICE.
•If you misdial, press . Digits are
erased from the right. To erase all digits,
press and hold .
C
C
•If 5 beeps sound in step 5, the entered 4-digit
handset PIN is incorrect. Enter the correct
PIN.
Once you have programmed the 4-digit Handset PIN, you cannot confirm it. We recommend you to
write down your 4-digit Handset PIN. If you forget it, please consult your Panasonic Customer Care
Centre.
•A beep sounds.
•To return to the standby mode, press
or wait for 60 seconds.
1st
2nd
Enter Old PIN
1234567890 :
----
Enter New PIN
1234567890 :
----
Verify New PIN
1234567890 :
----
You need to enter the 4-digit handset PIN for the following functions.
— To set the call prohibition mode ON/OFF (p. 50).
— Reset Handset Settings (p. 53).
— To cancel the base unit (p. 82).
Make sure that the power is ON (p. 12), and the unit is in the standby mode.
4-digit handset PIN
KX-TCD725EM-3(38~64) 01.10.24 14:38 Page 40