Filter
Top Products
1.7 Useful Features
1-82 Operations
Canceling the Feature Settings (Station Feature Clear)
Allows you to reset the following station features to the default settings.
a) Absent Message Capability
b) Automatic Callback Busy (Camp-On)
c) Background Music (BGM)
d) Call Forwarding
e) Call Pickup Deny
f) Call Waiting
g) Data Line Security
h) Do Not Disturb (DND)
i) Executive Busy Override Deny
j) Log-In/Log-Out
k) Message Waiting – (All messages will be erased.)
l) Pickup Dialing – (The stored telephone number will be erased.)
m) Paging-Deny
n) Room Monitor
o) Timed Reminder
p) Voice Mail Integration
Clearing the current feature settings
Any Telephone
Dial 79#.
7 9 #
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
Confirmation tone
and dial tone
Alternate Calling — Ring/Voice (Voice to Ring only)
“Voice Call” (through the built-in speaker) which is set at the called party’s extension can be
switched to “Tone Call” (ringing). This feature must be set beforehand at the called party’s
extension. Refer to Proprietary Telephone Settings (Section 1.2). A rotary phone cannot be
used.
Any Telephone
Off-hook. Enter an extension number. Ring back toneConfirmation tone
(1 beep)
Dial .
extension no.
• See the Installation Manual, Section 3, “Station Feature Clear”.
☞
• See the Installation Manual, Section 3, “Alternate Calling — Ring/Voice (Voice to Ring only)”.
☞
• Single line telephone users can dial “0” instead of “#”.
Technical Manuals Online! - http://www.tech-man.com