Filter
Top Products
1.7 Useful Features
1-60 Operations
!
!
To leave the conference
Any telephone
Hang up or press SP-PHONE.
• A conversation with the desired party is established and the other
party is disconnected.
To talk to the original party while holding the third party
To terminate one party and talk to the other
SLT
Talk to the original party.
Flash the hookswitch.
Confirmation tone
(optional)
PT
Talk.
Press the CO or INTERCOM of
the party to remain connected.
CO
or
INTERCOM
Confirmation tone
(optional)
• The other two parties may continue their conversation.
• If the other two parties are both outside (CO) lines, they will be disconnected.
• A conference call can also be established by “Executive Busy Override”.
• When a 2-party call is changed to a 3-party call or vice versa, a confirmation tone is sent to
all parties. The tone can be disabled.
• Pressing a CO button which is not in the conference allows you to exit from the conference,
leaving the other two parties connected unless they are both outside (CO) lines.
If the other parties are both outside (CO) lines, they will be disconnected.
• If the third party does not answer, press the CO button or INTERCOM button to return to
the second party.
• To change a 3-party conference to a 5-party conference, refer to “Conference (5-party)”.
• You can return to the original party before the third party answers by flashing the
hookswitch.
• If “Hold-2” or “Hold-3” is assigned in System Programming, you must dial “20” after
flashing the hookswitch.
SLT
SLT
PT
PT
PT
Technical Manuals Online! - http://www.tech-man.com