Filter
Top Products
1.8 Operator / Manager Service Features
Operations 1-97
Operator / Manager
/ DSS Console Operations
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM” or
press the PROGRAM button on the KX-T7300 series.
• After programming, return the MEMORY switch to the “SET” position or press the
PROGRAM button on the KX-T7300 series.
• The extension number is displayed in the order of the jack number when you press the
NEXT or PREV button.
• In the Account Code Verify–Toll mode, you should not assign similar numbers as the
emergency call codes. For example, if “911” is assigned as an emergency code, and you
assign “9111” as an extension password, the system regards the entered number, “9111”, as
the emergency code.
• To erase an incorrect entry, press the CLEAR (TRANSFER) button and enter a new
number.
• 1.7 Useful Features, “Calling Using Your Privileges at Another Extension (Walking COS)”
• See the Installation Manual, Section 3, “Extension Password/System Password”.
• See the Installation Manual, Section 3, “Toll Restriction Override by Extension Password”.
• See the Installation Manual, Section 3, “Walking COS”.
!
!
☞
Extension Password Set (Manager only)
The manager can assign a password to each extension. The assigned password can be used for
the Toll Restriction Override by Extension Password and Walking COS features.
Setting
PT
Dial 7. Enter the system
password (4 digits).
7
password
Press
AUTO DIAL/STORE.
AUTO DIAL
STORE
SP-PHONE
Press
SP-PHONE
(NEXT).
Enter the
password
(4 digits).
password
Press
AUTO DIAL/STORE.
AUTO DIAL
STORE
Press SP-PHONE (NEXT)
or REDIAL (PREV) and
select the extension you
want to assign.
Repeat these steps.
SP-PHONE
REDIAL
• You may enter the pre-assigned extension
password (4 digits) of extension jack 01
instead of the system password.
Technical Manuals Online! - http://www.tech-man.com