Filter
Top Products
1.7 Useful Features
Operations 1-79
Advanced Operations
External Feature Access
• A “Flash Time” must be assigned as required by the host PBX, or outside (CO) line.
• You may access some features of the host PBX using the FLASH button. If the system is
connected to a host PBX and the flash operation is required, follow the flash operation
procedure which is required by the host PBX.
• FLASH button also allows you to disconnect the current call and make another call without
hanging up by System Programming. You can also assign a flexible button for the flash
button.
• 1.2 Proprietary Telephone Settings, “Customizing the Buttons on Your Telephone”,
One-Touch Access for System Features
• 1.3 Making Calls, “Flash”
• See the Installation Manual, Section 3, “External Feature Access”.
PT
PT
Allows you to access special features (e.g. Call Waiting) offered by a host PBX or Central
Office. This feature is effective only during an outside call. You can access the feature by
using either the FLASH button or the feature number.
Using the FLASH button
PT
Press FLASH.
Enter the desired service code.
FLASH
code
During a conversation with an outside party
• The current call is placed on hold.
SLT
Flash the hookswitch.
Enter
the desired service code.
code
During a conversation with an outside party
Dial 6.
6
• The current call is placed on hold.
Using the feature number
!
!
☞
Technical Manuals Online! - http://www.tech-man.com