Panasonic KX-TD1232 Telephone User Manual


 
Operations 1-27
1.3 Making Calls
Basic Operations
Redialing Automatically (Automatic Redial)
The number of times can be changed by System Programming.
If another operation is performed during automatic redial, this function will be canceled.
To cancel automatic redial, press the FLASH button.
This feature is not available for a KX-T7055.
A flexible button can be assigned as the SAVE button.
1.3 Making Calls, “Redialing the Last Number Dialed (Last Number Redial)”
1.3 Making Calls, “Redialing the Saved Number (Saved Number Redial)”
See the Installation Manual, Section 3, “Redial”.
PT
PT
PT
PT
PT
PT users can redial the last number dialed and saved number automatically by going off-hook
with the SP-PHONE/MONITOR button and pressing the corresponding button directly. Redial
will be automatically repeated the pre-programmed number of times until the called party
answers.
PT
Press REDIAL or SAVE.
Press SP-PHONE or MONITOR.
SP-PHONE MONITOR
REDIAL
SAVE
oror
!
!
Automatically saves the last outside phone number dialed so that you can make a call to the
same party later using a simple operation.
PT SLT
Lift the handset. Dial ## or 80.
8 0
or
Press REDIAL.
REDIAL
Lift the handset or press
SP-PHONE/MONITOR.
##
Redialing the Last Number Dialed (Last Number Redial)
Up to 32 digits can be stored and redialed. This does not include an outside (CO) line access
code.
If you hear a busy tone when attempting to redial, select another line and press the REDIAL
button or feature number.
”, “#”, “PAUSE”, and “INTERCOM” (for secret dialing) are counted as 1 digit.
While calling or during a conversation, pressing the REDIAL button will disconnect the
current call and redial the stored number.
You can check the stored number. Press the REDIAL button while on-hook, and the stored
number will be displayed.
PT
PT
PT
!
!
Technical Manuals Online! - http://www.tech-man.com