Filter
Top Products
1.7 Useful Features
1-68 Operations
• In the Verify-All and Verify-Toll modes, you must always enter a pre-assigned account
code.
• You do not need to make an account code entry when receiving incoming calls.
• You can clear and re-enter a number by pressing “ ” or the FWD/DND button while
entering an account code.
• An account code can be stored into Memory Dialing (“One-Touch Dialing”, “Pickup
Dialing”, “System/Personal Speed Dialing”, “Call Forwarding — to Outside (CO) Line”).
The sequence to enter an account code into Memory Dialing is as follows.
— [Feature Number] [Line Access Code] [ ] [Account Code] [Phone Number]
• If an entered account code does not match the pre-assigned account code in the verify-all
mode or the verify-toll mode, when making an outside call, a reorder tone is heard.
• An account code has 4 digits (0 through 9). FLASH, PAUSE, etc. cannot be used.
• 1.8 Operator/Manager Service Features, “Extension Password Set (Manager only)”
• See the Installation Manual, Section 3, “Station Message Detail Recording (SMDR)”.
• See the Installation Manual, Section 3, “Account Code Entry”.
• See the Installation Manual, Section 3, “Toll Restriction Override by Extension Password”.
PT
!
!
☞
Technical Manuals Online! - http://www.tech-man.com