Filter
Top Products
Answering System
61
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Greeting message
When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or
use a pre-recorded greeting message.
Recording your greeting
message f
You can record your own greeting
message (max. 2 minutes) that is played
when the answering system answers a
call.
The greeting messages can be
recorded:
– separately for either the IP line or
landline.
– for both the IP line and landline using
a common greeting.
If you do not record a greeting message,
a pre-recorded greeting message is
used.
1 Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 {dr}
3 Within 10 seconds, press {dr}
again.
4 After the base unit beeps, speak
clearly about 20 cm away from the
MIC.
5 To stop recording, press {■}.
Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a pre-
recorded greeting message for callers
and asks them to leave messages.
Playing back the greeting
message f
1
Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 {dg}
Erasing your greeting
message f
1
Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 Press {dg}, and then press {4}
while your greeting message is
playing.
Listening to messages
using the base unit
When new messages have been
recorded, {6} on the base unit flashes.
Press {6} (centre of navigator key).
L The base unit plays new messages
including voice memos.
L When you have no new messages,
the base unit plays back all
messages.
Playing back messages for the
desired line(s)
1 Press {IP/TEL} repeatedly until the
display shows the desired line(s)
(n and/or m).
2 Press {6} (centre of navigator key).
Note:
L If you select the line(s), voice memos
are not played (page 63).
GT15xxE.book Page 61 Wednesday, August 1, 2007 11:59 AM