Filter
Top Products
Preparation
18
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Installation
Connecting to a landline and the Internet (IP line)
Connect the base unit to a broadband router or modem with a built-in router.
*1 Computer is not required for setup or making/answering internet calls.
1 Connect the supplied Ethernet cable until it clicks into the “LAN” port on the base
unit and unused Ethernet (LAN) port on your router or modem with a built-in
router.
2 Connect the supplied telephone line cord until it clicks into the “TEL” port on the
base unit and telephone line jack.
3 Connect the supplied AC adaptor to the base unit by pushing the plug firmly, then
plug the other end into the AC outlet.
L Use only the supplied Panasonic AC adaptor.
L The 4 indicator on the base unit lights in red for about 3 seconds (page 23).
Hook
(220-240 V, 50 Hz)
To AC mains outlet
To telephone network
AC adaptor
3
Telephone
line cord
Ethernet cable
Router
Computer
(Optional) *1
Cable or
DSL modem
Internet
Press
plug firmly.
TEL
LAN
1
2
GT15xxE.book Page 18 Wednesday, August 1, 2007 11:59 AM