Filter
Top Products
Base Unit Speed Dialler
43
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Base unit speed dialler
You can assign one phone number to
each of the 10 dial keys ({0} – {9}) on
the base unit.
Adding phone numbers to the
speed dialler
Important:
L Before adding phone numbers, make
sure the base unit is not being used.
1 {l}
2 Enter the phone number (max. 32
digits).
L If a pause is required for dialling,
press {R} where needed.
L If you misdial, press {■} and
repeat from step 1.
3 {l}
4 Press a dial key ({0} – {9}).
Note:
L If a phone number is assigned to a dial
key which already contains a phone
number, the old number will be
erased.
L We recommend you make a note of
which phone numbers are stored in
which dial keys.
L When {*} is pressed, “$” is
displayed.
When {#} is pressed, “#” is
displayed.
When {6 } is pressed, “F” is
displayed.
PAUSE button
A pause is sometimes required when
making calls, for example using a PBX
or long distance service. If you need to
dial the line access number “0”
(example) when making landline calls
with a PBX:
In step 2, press {0}, {R}, then enter the
phone number.
Note:
L A 3 second pause is inserted each
time {R} is pressed. Press
repeatedly to insert longer pauses.
“P” is displayed when {R } is
pressed.
To erase a stored phone number
1 Press {l} 2 times.
2 Press the desired dial key ({0} –
{9}).
Calling someone with the
speed dialler
Important:
L Make sure to choose the appropriate
line for the phone number.
1 To make a landline call, press
{TEL}.
To make a A internet call, press
{IP}.
2 {l}
3 Press the desired dial key ({0} –
{9}).
Note:
L Speed dial numbers assigned to the
base unit dial keys can only be dialled
from the base unit.
Available model:
BB-GT1540
GT15xxE.book Page 43 Wednesday, August 1, 2007 11:59 AM