Filter
Top Products
ADDITIONAL FEATURES
Page 26 of 31
Registering a new handset
Each base can register up to 4 handsets. Each handset can register up to 4 bases. If you buy an additional cordless handset you need
to follow these steps.
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select REGISTRATION and press the OK key.
4. Before you enter the PIN, press and hold the PAGING key on the base for 4 seconds.
5. Enter the PIN (The default pin code is 0000) and press the OK key.
Selecting a Base
If your handset is registered to more than 1 base, you can select which base the handset will use.
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select BASE SELECT and press the OK key.
4. Select the base to use and press the OK key.
Un-registering a handset
A handset can un-register another handset registered to the same base. It cannot un-register itself.
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select DELETE HS and press the OK key.
4. Select the handset you would like to un-register and press the OK key.
5. Enter the PIN (The default pin code is 0000).
6. Press the OK to confirm.
Changing PIN
A PIN (personal identification number) code is required to access the registration, delete handset, and reset mode.
The default PIN code is 0000. You can change it to a unique code of your own. A PIN code can be up to 8 digits long.
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select CHANGE PIN and press the OK key.
4. Enter the current PIN and press the OK key.
5. Enter the new PIN and press the OK key.
6. Repeat the new PIN.
7. Press the OK to confirm.
The base is full
You can register up to 4 handsets to the same base. After registering 4 handsets to the same base, your base is full. If you
want to register an additional handset, you have to un-register one of the handset. See Un-registering a handset for more
detail.
Successful registration
You will hear a confirmation tone if the registration is successful. The handset label, the handset number, and the clock will
be displayed.
Unsuccessful registration
If the registration is not successful, the handset registers back to its original base unit, or SEARCHING is displayed if it has
lost link with its original base, or UNREGISTER is displayed if it is registering for the first time. Follow the procedure and
try again.
Unsuccessful chang
e
You will hear a reject tone if the new PIN is not repeated correctly. Follow steps 3 to 7 and try again.