Filter
Top Products
ADDITIONAL FEATURES
Page 25 of 31
10 Advanced features
Recall
Your phone comes with different Recall durations. Check with your local service provider if you are not sure which duration to use.
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select RECALL TIME and press the OK key. The current setting is displayed.
4. Select the desired Recall durations.
5. Press the OK key to confirm.
Pause
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select PAUSE and press the OK key. The selected pause duration is displayed.
4. Press UP and DOWN to select the Pause duration.
5. Press the OK key to confirm.
PABX
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select PABX and press the OK key. The current PABX number (if available) will display.
4. Enter the PABX number to enable this feature. To disable PABX, clear the number.
5. Press the OK key to confirm.
Baby call
Baby call allows you to dial out a programmed number by pressing any key on the handset (except the OFF key).
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select BABY CALL and press the OK key. The current setting is displayed.
4. Select ON and press the OK key.
5. Enter or edit the number.
6. Press the OK key to confirm. BABY CALL is displayed when you return to standby mode.
To turn off baby call,
1. Press the OFF key.
2. Select OFF and press the OK key.
Visual Message waiting indication (VMWI)
You have to subscribe to a voice message service (eg Telstra Message Bank) from your local service provider to use this feature. When
you receive a voice message, will appear on the display. When you retrieve your messages the message will turn off.
You can clear the Voicemail waiting indicator before retrieving all the new voicemail messages. Please note that this will not clear the
voicemail message waiting indicator for Skype voicemail messages.
1. Press the MENU key.
2. Select ADVANCED SET and press the OK key.
3. Select VMWI and press the OK key.
4. The prompt “DELETE?” will be shown.
5. Press the OK key to confirm.
Note: Your handset must have a link with the base unit in order to use an
y
advanced features mentioned in this section.