Filter
Top Products
Chapter 2 Installing the i2050 Software Phone 21
i2050 Software Phone Installation Guide
Communications Server
If your site uses DHCP:
1 Select the Obtain server address automatically option.
Using DHCP is the default method of locating the Communications Server.
If DHCP is used, no further configuration is required.
If you are not using DHCP:
1 Select the Use the following server address information option.
2 Enter the name of the communications server and then enter or select the port number.
Or
Enter the IP address of the communications server and then enter or select the port number.
If you do not know the communications server name or IP address and port number, ask your
communications server administrator.
Note: To use DHCP, you need a DHCP server with communications server IP
address values programmed as per the i2004.
Note: Using DHCP may not be appropriate for mobile users. These users commonly
want to connect to their office communications server rather than the local office
server.