Filter
Top Products
Troubleshooting
69
LED Error Indications
See the Mitel 5624 Wireless Handset Configuration Guide.
LED is flashing red, quick flash, (100 ms on, 800 ms off)
1. If a third handset, that is another handset than the "old" (the replaced handset) and "new"
(the replacement headset) handset, is inserted into the charger during Easy Replacement,
this error indication appears. Change to the correct handset.
2. The charger has found that Easy Replacement does not work. Change back to the "new"
handset.
LED is flashing red, long flash (800 ms on, 100 ms off)
Error during Easy Replacement. Both telephones need to be sent for service.
Not allowed 1) The handset that has shared phone
functionality enabled cannot be
logged in because another
handset/user is using the extension.
Note: If you require a password (AC
code) to log in a handset and the
handset is logged in, you can log in a
second handset. The first logged in
handset will automatically be logged
out.
2) The extension (user) does not
exist.
3) The password is incorrect.
1) Log out the handset that uses
the extension.
2) Make sure that you entered the
correct extension. if required,
contact the system administrator.
3) Make sure you have entered the
correct password. Contact the
system administrator if you have
forgot the password.
Display shows Probable cause Action or comment