Mitel 5624 Bluetooth Headset User Manual


 
About Your Phone
13
In Standby Mode and Number Input Mode
A short press on a key enables you to enter the digits “0” - “9” and the characters * and #.
You enter a pause in the number input mode by a long press on the # key. A pause is
indicated by a "P" in the display.
In Text Input Mode
A short press on a key 0-9, displays the first available character on that specific key. The
marked character is selected after a timeout, or when another key is pressed.
You change to upper/lower case, by pressing the * key before entering the character. The
* key can also be used to display only the digits.
To add space in the text, make a short press on key 0.
The first character entered in a message, or when adding/editing a name in the Contacts
menu, will be an upper level character followed by lower level characters (unless the * key
is pressed before you enter the character). To switch between Abc, ABC, abc, and 123 you
press the * key.
A long press on the #-key displays special characters.
Headsets
If you will use your handset frequently, we recommended you use a headset so you have both
hands free. The headset comes in two versions: microphone integrated in the cable or
microphone on a boom. You can use any headset with a 2.5 mm connector and configure
options for the headset using the user’s headset profile.
In order to achieve optimal audio quality with your headset we recommend you select the
corresponding headset profile. See the Mitel 5624 Wireless Handset Configuration Guide for
more information.