Filter
Top Products
Customizing Your Phone
15
Log On a Handset
Before you log on to the handset, ensure it has been switched on. See the Mitel 5624 Wireless
Handset Configuration Guide for more information.
1. When the "Login?" window appears, press "Yes".
2. Enter the user name.
3. If required, enter the password.
4. Navigate by using Up and Down on the Navigation key.
5. Press “Log in”.
If the handset does not find the WLAN upon start-up a “No Network” window appears. If the
handset does not receive an IP address from the system a “No Access” window appears.
Log Off a Handset
Note: The handset must be in idle mode. While in a menu, press the End key to return to idle
mode.
1. Press and hold .
2. When the "Log off?" window appears, press "Yes".
Turn On/Off the Audible Signal
The handset must be in idle mode. A long press on the or in idle mode toggles the
ring signal on/off.
The icon indicates a silenced handset.
Lock/Unlock the Keypad
Lock/Unlock the Keypad in Idle Mode
You can lock keys to prevent you from accidentally pressing them.
1. Press .
2. Press "Lock".
Unlock keypad
1. Press
2. Press "Yes".
Note: You can answer/close an incoming call and/or press the alarm button while the
keypad is locked. If configured in Portable Device Manager (PDM), you can call a
pre-defined emergency number while the keypad is locked. See the Mitel 5624 Wireless
Handset Configuration Guide.