Filter
Top Products
5312/5324 IP Phones User Guide
Messaging - Callback
To leave a Callback Message when you hear busy or ringback tone:
• Press
( MESSAGE ) or, on a 5324 IP Phone only, press the Callback softkey.
To respond to a message waiting condition on your 5312 IP Phone:
1. Press
( MESSAGE ).
2. If a password is required, dial your password.
3. Do one or all of the following:
• To call the message sender, press #.
• To erase the message, press *.
To respond to a message waiting condition on your 5324 IP Phone:
1. Press
( MESSAGE ).
2. If a password is required, dial your password (and press the Enter softkey if available).
3. Press the Yes softkey, and do one or all of the following:
• To display the time the message was sent, press the More softkey.
• To display the number of the caller, press the More softkey twice.
• To call the message sender, press the Call softkey.
• To delete the message, press the Erase softkey.
• To view the next message, press
( MESSAGE ).
On a 5324 IP Phone only, you can set, change, or clear a password (up to 7 digits, not including 0):
1. Press
( MENU ).
2. Press the No softkey until "Set Password?" appears.
3. Press the Yes softkey.
4. Do one of the following:
• To enter a new password, enter your password.
• To change or clear your password, enter your current password.
1. Press the Enter softkey.
2. changing or clearing your password, do one of the following:
• To change your password, enter your new password and press the Enter softkey.
• To clear your password, enter 0.
1. Enter your new password again.
2. If you are setting up or changing a password, press the Enter softkey.
3. Press
( MENU ).
19