Filter
Top Products
-76-
Making and Answering Calls Using the Analog key
To make a call using the Analog line:
1. Lift the handset.
2. Press the key you programmed as Line Interface Module.
ANALOG CALL is displayed.
3. Dial the number.
Note: When you make an external call over the analog line, a prefix dialing
number is not required. If your phones Line Interface Module key has the
Privacy option enabled, you cannot access the analog line when another
phone is using the analog line (key is solid orange).To access the analog
line, the user of the other phone must first hang up. To determine whether
the Privacy option is enabled, contact your System Administrator.
To answer a Call using the analog line:
1. Lift the handset.
2. Press the Line Interface Module key that is highlighted.
To answer a waiting call on the analog line:
Note: If you have subscribed to an analog call waiting service, you may use
the hookswitch or press Cancel ( ) to answer a waiting analog call. When
you are on an analog call and a waiting analog call arrives, you hear a beep.
This feature may not be supported in all regions.
To answer a waiting analog call or return to the original analog call:
1. Do one of the following:
Press and release the hookswitch
Press Cancel ( )
2. Press the key you have programmed as Line Interface Module.
To put a current call on hold to answer an incoming analog call:
z
Press the highlighted Line Interface Module key.