Filter
Top Products
-36-
Program a hard key
To pro
g
ram Superkey, Hold, Transfer/Conference, Cancel, Microphone,
A
nalo
g
Line, Messa
g
e, Redial and Speaker:
1. Open the Settings shutter.
2. Press the scroll buttons ( ) until the My Phone Setup setting is listed.
3. Press the My Phone Setup setting.
4. Press the key you wish to program. A programming window with three
tabs displays.
5. Press the Hard keys tab.
6. Press on a hard key from the list. Use the scroll buttons ( ) to display
additional hard keys.
7. Press Label. An on-screen keyboard displays.
8. Enter a text label for this hard key and press OK.
Note: It is not necessary to clear programming from a key before you
reprogram it.
Clear programming from key
It is not necessary to clear programming from a key before you reprogram
it. However, you may wish to clear the programming from a key if you are
no longer using it.
To clear the feature or hard key programming associated with the key:
1. Open the Settings shutter.
2. Press the scroll buttons ( ) until the My Phone Setup setting is listed.
3. Press the My Phone Setup label.
4. Press the key you wish to clear.
5. Press Clear Key. The programming window is displayed.
You can either press Cancel to close this window or you can reprogram
this key immediately.