Filter
Top Products
-57-
To make an Emer
g
ency Call usin
g
the Line Interface Module line, when
the IP connection has failed:
1. Lift the handset.
2. Press the Line Interface Module key that you have programmed.
The set indicates IP FAIL: ANALOG CALL.
3. Dial your Local Emergency Number.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING
PROGRAMMED
Note: This procedure is in addition to the methods described above.
To make an Emergency Call if Emergency Call Routing is programmed:
1. Lift the handset.
2. Dial your Local Emergency Number (911 or equivalent).
For more information on using the Line Interface Module line, refer to Using
the Line Interface Module.
Headset Operation
To enable Headset Operation:
z
Press the Headset key ( ).When Headset Operation is enabled the
Headset icon ( ) is displayed beside the extension number
To answer a call (when Auto Answer is disabled):
z Press the line key with the flashing icon.
To hang up:
z Press the Cancel key ( ).
To disable Headset Operation:
z
Press the Headset key ( ).