Filter
Top Products
Mitel 3000
Getting Started Guide
Configuring Night & Weekend Service
15
Instruction Action
Menu Display
From the System Programming
sub menu select [System]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[Night Service]
Select Option
-Programming Position
-Night Service
-Music On Hold
Program night service Automatic On
& Off times
[Apply Weekend (if required)]
Scroll
Select Option
-Automatic On Times
-Automatic Off Times
-Weekend Service
Select the required On Times
Select Option
-On Time 1
-On Time 2
-Exit
Enter the time to be set and then
select Confirm
Set Time [HHMM]
-Confirm
-Change
-Delete
Select the required Off Times
Select Option
-Off Time 1
-Off Time 2
-Exit
Enter the time to be set and then
select Confirm
Set Time [HHMM]
-Confirm
-Change
-Delete
Note: You can apply two sets of times for the Night Service rules to be applied, typically they
are used for lunchtime and out-of-office hours.
Night Service allows you to configure different call routing plans for these time periods.
You may exit the menu at any time and the settings will be saved.
The time should be entered as 24hour time, eg 1:00pm would be entered as 1300, and
1:00am should be entered as 0100