Lucent Technologies 8434DX Telephone User Manual


 
IMPORTANT USER SAFETY
INSTRUCTIONS
The most careful attention has been devoted to quality standards in the
manufacture of your new voice terminal. Safety is a major factor in the design of
every set. But, safety is YOUR responsibility too.
Please read carefully the helpful tips listed below and on the next page. These
suggestions will enable you to take full advantage of your new voice terminal. Then,
retain these tips for later use.
CAUTION: This voice terminal is NOT for residential use. It is for business systems
applications ONLY. Use in a residential environment could result in an electrical
short circuit when the telephone wiring is set up to provide other applications, for
example, for appliance control or power transformers. The AC power used in these
applications may create a safety hazard by placing a direct short circuit across the
telephone wiring.
Use
When using your telephone equipment, the following safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury to persons.
Read and understand all instructions.
Follow all warnings and instructions marked on the telephone.
This telephone can be hazardous if immersed in water. To avoid the possibility of
electric shock, do not use it while you are wet. If you accidentally drop the
telephone into water, do not retrieve it until you have first unplugged the line cord
from the modular jack. Then, call service personnel to ask about a replacement.
Avoid using the telephone during electrical storms in your immediate area. There
is a risk of electric shock from lightning. Urgent calls should be brief. Even
though protective measures may have been installed to limit electrical surges from
entering your business, absolute protection from lightning is impossible.
If you suspect a natural gas leak, report it immediately, but use a telephone away
from the area in question. The telephones electrical contacts could generate a tiny
spark. While unlikely, it is possible that this spark could ignite heavy
concentrations of gas.