Filter
Top Products
4
6. Snap one end of the coiled cord into the Handset jack. This jack is labeled
. (On some 8403 voice terminals, you must thread the cord into the
channel leading to the side edge of the voice terminal; the handset cord will then
lead off the side of the voice terminal.)
WARNING: Do not insert the handset cord into the Adjunct jack.
It may cause equipment damage.
FIGURE 1: Line, Adjunct, and Handset Cord Routing for Desktop Installation on the
8403, 8405, and 8410 Voice Terminals
Adjunct
jack
Handset
Routing channel
for line cord and
adjunct cord Desktop stand
jack
Line
jack
> ABS <
NOTE: The location of the jacks and the routing channel
on the back of your voice terminal may differ slightly
from the location shown in this figure.