Filter
Top Products
19
• If a PC used for the PassageWay Solution software is connected to the 8411, type
a “y” in the PassageWay field on the first administration screen.
• If an analog adjunct is connected to the 8411, type “analog” in the Data Option:
field on the first administration screen.
• On the last administration screen, enter the appropriate information for the Analog
Adjunct.
PROGRAMMING OPTIONS ON THE 8411 VOICE
TERMINAL
Use the following procedures for selecting options for an 8411 voice terminal.
Selecting Whether the I-1 Channel or the I-2 Channel Will Be Used for
the Analog Adjunct (For the 8411 Only)
If the 8411 is connected to a DEFINITY Generic 3, Version 4, Issue 3 (or later), the
Analog (Tip/Ring) Adjunct and voice terminal can handle calls simultaneously over
the I-1 Channel and the I-2 Channel. The system manager can administer the voice
terminal to select which of the two channels the Analog (Tip/Ring) Adjunct will use.
NOTE: The following are reasons why you would change the factory setting for the
Analog Adjunct from the I-2 Channel to the I-1 Channel:
• The voice terminal is connected to a DEFINITY switch before G3V4,
Issue 3
• Anytime the 8411 voice terminal is NOT administered as an 8411B or 8411D
• If you need to use an analog device on the I-1 Channel