Filter
Top Products
22
Enabling/Disabling the Status Lights for the PassageWay Connection
(For the 8411 Only)
If a PC for the PassageWay Solution has been connected to the
RS-232-D jack on the rear of the 8411, the user can use Button #9 (the
next-to-last button in the second column) to see the status of the PassageWay
connection. For a list of PassageWay indications, see “PassageWay and Analog
Adjunct Status Indications on the 8411” earlier in this manual.
To enable or disable the status lights for the PassageWay connection
1. While on-hook, press .
• The light next to goes on.
2. Press .
• The light next to goes off.
3. Enter the 2-digit code, “79” (“PW”).
• The red and green lights next to Button #9 flutter.
• The current setting (ENABLE PWY STATUS LAMPS or DISABLE
PWY STATUS LAMPS) is shown on the display, if there is one.
4. Press either “1” or “2” to change the setting:
• Press “1” to enable the status lights for the PassageWay connection (next to
Button #9)
• Press “2” to disable the status lights for the PassageWay connection
or if the voice terminal has a display, press to change the setting. Press
to save the desired option and then exit programming.
• After pressing “1” or “2” or pressing , the light next to goes
off and one of the following voice terminal responses occurs:
If the voice terminal saves your selection, the first three green call
appearance lights go on and, if you have a display, a confirmation
message is displayed.
If the voice terminal cannot save this selection, the first three red call
appearance lights go on and, if you have a display, an error message is
displayed. In this case, the selected option will be in effect until power is
removed from the set. If this happens, try repeating the process. If the
option still cannot be saved, the terminal may be faulty.
OTHER 8400-SERIES VOICE TERMINALS
DOCUMENTATION
The following documentation provides instructions for using both the fixed and the
switch features. These documents can be ordered from the Lucent Technologies BCS
Publications Center.
Shift
Shift
Mute
Shift
*
#
#
Shift