Filter
Top Products
9
Wall Installation
NOTE: The 8403, 8405, and 8410 voice terminals can be wall-mounted.
The 8411 and the 8434DX voice terminals CANNOT be wall-mounted.
For wall-mounting, you need a 1-foot D8W line cord (not supplied with the voice
terminal; Comcode: 103786760).
To wall-mount the 8403, 8405, and 8410 voice terminals
1. Make sure the 8-conductor wall mount plate is in place.
2. Press down on the handset retainer hook located under the handset and slide it
toward the top of the voice terminal. See Figure 6.
3. Rotate the hook and slide it back into its slot so the bottom part now sticks out
from the top. Snap the hook firmly into place. See Figure 6.
FIGURE 6: Reversing the Handset Hook
¾
a. Handset
retainer
b. Press to release
and then remove
handset retainer
d. Replace
handset
retainer
in place
c. Rotate
handset
retainer
180 degrees