Filter
Top Products
Pocket PC Phone User Manual86
Getting
Connected
Pocket PC Phone User Manual 87
Getting
Connected
6
To start the connection, begin using the desired program. For example,
switch to Pocket Internet Explorer and browse to a Web page. Your device
will automatically connect.
To change modem connection settings, in either My ISP or My Work Network
,
tap Manage existing connections. Select the desired modem connection,
tap Settings, and follow the instructions on the screen.
Set up a WAP gateway
To access WAP sites through Pocket Internet Explorer, congure your device to use a
WAP gateway. Use the following steps to create a new set of connections to the Internet
with WAP gateway settings.
1
Get the following information from your ISP :
ISP server phone number, user name, and password. Also, contact your
mobile phone service provider and ask for your WAP gateway server name
and port number.
2
Tap → Settings → Connections tab→ Connections → Tasks tab.
3
Tap Edit my proxy server. If a proxy server has not been set up, tap Set
up my proxy server.
4
In Programs that automatically connect to the Internet should connect using,
tap New and enter a name for the ISP connection.
5
On the Proxy Settings tab, select This network connects to the Internet
and This network uses a proxy server to connect to the Internet.
6
If necessary, in the Proxy server box, enter the proxy server name.
7
Tap Advanced.
8
In the WAP box, enter the WAP gateway server name. Under Port, enter
the port number. The most common WAP
port number is 9201.
9
Create a modem connection. Also, if necessary, set dialing rules.