Filter
Top Products
65
12
OTHER FUNCTIONS
12
DD
DTMF rate
The rate at which DTMF memories send individual DTMF
characters can be set to accommodate operating needs.
• 1: 100 msec. interval; 5.0 cps rate (default)
• 2: 200 msec. interval; 2.5 cps rate
• 3: 300 msec. interval; 1.6 cps rate
• 5: 500 msec. interval; 1.0 cps rate (cps=characters/sec.)
DD
Dial assignment
Selects [VOL] control action from volume and tuning dial.
• tOP.VO: AF volume (default)
• tOP.dI : Tuning dial
DD
Display type
Selects LCD indication type from frequency, channel number
and channel names.
• dSP.FR : Shows frequency (default)
• dSP.CH : Shows channel number*
• dSP.nm : Shows channel names
†
*Only memory channels can be selected.
†
Frequency indication will be displayed when the selected memory
channel has no programmed memory name.
NOTE: When this setting is selected other than “FR” (“CH”
or “nm”) and accessing
SET MODE
from memory mode,
most of set mode items are restricted.
DD
LCD contrast
Selects LCD contrast from auto, high and low.
• LCd.At : Automatic (default)
• LCd.HI : High contrast
• LCd.LO : Low contrast