Filter
Top Products
26
6
MEMORY/CALL OPERATION
■ Transferring bank contents
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q
Select the desired bank contents to be transferred or erased.
➥ Push [C•
MR
] to select memory mode.
➥ Push [A•
FUNC
] and [#•
BANK
],
then rotate [VOL] to select the
desired memory bank.
•Bank indicator blinks.
➥ Push [✱•
ENT
] (or [D•
CLR
]) to
select the bank then push [
YY
]
and [
ZZ
] to select the desired con-
tents.
• Bank indicator stops blinking.
w Push [A•
FUNC
] and [8•
SET
] to enter
SET MODE
.
e Push [
YY
] or [
ZZ
] several times until
“bAk” appears.
• Bank indicator appears.
r Rotate [VOL] to select the desired
bank to receive the transferred infor-
mation or erase the bank contents.
• Select “– –” indication when erasing the
contents from the bank.
t Push [✱•
ENT
] (or [D•
CLR
]) to transfer or erase, and re-
turn to regular memory mode.
y Repeat steps q to t for transferring or erasing an an-
other bank’s contents.
[VOL]
ENT
FUNC
A
SET
8
[VOL]
ENT
FUNC
A
BANK