Filter
Top Products
31
8
SCAN OPERATION
8
NOTE: Scan edges, 1A–3A/1b–3b, must be programmed
in advance. Program them in the same manner as regular
memory channels. (p. 22)
If identical frequencies are programmed into the scan
edges, programmed scan will not proceed.
■ Memory scan
Memory scan repeatedly scans all programmed memory
channels, except those set as skip channels.
qPush [C•
MR
] to select memory mode, if necessary.
•“
X
” appears.
• See below to select bank scan.
wPush [A•
FUNC
] and [5•
SCAN
] to start the scan.
•To change the scan direction, push [
YY
] or [
ZZ
].
• When [VOL] is assigned as tuning dial, rotate [VOL] to change
the scan direction. (pgs. 14, 65)
e Push [D•
CLR
] to stop the scan.
• Bank scan —Select the desired bank in step q above.
q Push [A•
FUNC
] and [#•
BANK
] to select memory bank mode.
w Rotate [VOL] to select the desired bank, A to J.
e Push [✱•
ENT
] (or [D•
CLR
]) to select the bank.
Push
SCAN
FUNC
A
5
MONI
CALL
DUP SCAN
PRIO
ENT
SET
H/M/L
OPTSKIP
BANK
TONE
T. SCANP. B EEP
MR CLRFUNC
PWR
987
4
123
AB DC
560