Filter
Top Products
D By other methods
Via the [
YY
]/[
ZZ
] keys
➥ Push [
YY
] or [
ZZ
] several times to set the desired frequency.
•Each push increases/decreases the frequency by the selected
tuning step. See next set of instructions for setting tuning step
size.
D Tuning step selection
The IC-V82/U82 has 8 tuning
steps— 5, 10, 12.5, 15, 20, 25, 30
and 50 kHz. The tuning step is selec-
table in
SET MODE
.
qPush [A•
FUNC
] then [8•
SET
] to
enter
SET MODE
.
wPush [
YY
] or [
ZZ
] several times to
select the tuning step item.
eRotate [VOL] to select the desired tuning step.
rPush [✱•
ENT
] to exit
SET MODE
.
[VOL]
ENT
FUNC
A
SET
8
14
4
BASIC OPERATION
✔ For your information— [VOL] function assignment
The [VOL] control can be used as
a tuning dial for frequency tuning
instead of [
YY
]/[
ZZ
] keys. However,
when [VOL] functions as tuning
dial, [
YY
]/[
ZZ
] keys functions as
volume control.
qWhile pushing [
YY
] and [
ZZ
],
turn power ON to enter
INITIAL
SET MODE
.
w Push [
YY
] or [
ZZ
] several times
to select the dial assignment
item, “tOP.”
e Rotate [VOL] to select the condition.
r To exit
SET MODE
, push [✱•
ENT
].
[VOL] is assigned as
AF volume control.
[VOL] is assigned as
tuning dial.
[VOL]
ENT
PWR