Filter
Top Products
HUAWEI MC509 CDMA LGA Module
Hardware Guide
Certifications
Issue 01 (2011-04-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
In the case of certification of the laptops installed with Huawei modules, the relevant
test reports of Huawei modules can be directly used in accordance with the following
rules:
The conductivity test data in the Huawei RF test report can be directly used by
the laptop manufacturer.
The laptop manufacturer should determine whether the radio test data in Huawei
RF test report can be used according to the antenna gain.
− The radio test data in Huawei RF test report can be directly used if the
antenna gain of the laptop is lower than that used in the certification test of
Huawei modules.
− The laptop manufacturer should test antennas of the laptops if the antenna
gain of the laptop is higher than that used in the certification test of Huawei
modules.
The laptop manufacturer should test the compliance of the laptops with EMC
and safety specifications.
The SAR of the laptops needs to be tested only if the antennas of the laptops are
within 20 cm of people.
IC Certification
Huawei applies for IC certificate to the relevant certification bodies by using an IC test
report converted from the FCC test report.
NCC Certification
Huawei mails a sample module to the ADT of Taiwan. The ADT then performs
relevant tests and issues an NCC certificate.
7.4 GCF and PTCRB
Conformance test and declaration are required for establishing that the GSM and
WCDMA terminals to be sold in a region meet the requirements of the local carriers
and networks.
Global Certification Forum (GCF) and PTCRB certifications are recognized in most
regions all around the world. Most operators all round the world accept either
certification as one of the market entry conditions.
7.4.1 GCF Certification
The GCF is an active partnership between European mobile device manufacturers
and mobile network operators.
According to the R&TTE Directive 1999/95/EC issued in 2001, authorized test
organizations or manufacturers should perform final conformance tests of GSM
terminals in compliance with the GCF certification criteria (GCF-CC). Manufacturers
then should prepare a DOC and take all responsibilities for quality of the equipment.
The GCF officially launched the 3G WCDMA certification program in February 2005.
The GCF plays an important role in protocol and application conformance testing.
The GCF provides harmonized standards for conformance tests and defines a test