Chapter 5 | Sending and receiving e-mail | 59
the POP3 host name of your ISP
the SMTP host name of your ISP (if required by your ISP)
Setting up a dial-up connection to your ISP
After you have established an account with an ISP, you can set
up a connection on the HP Jornada and send and receive e-mail
whenever you want.
To set up a dial-up connection
1. On the
Start
menu, tap
Programs
, tap
Communication
, and then tap
Connections
.
2. In the
Connections
folder, double-tap
Make New
Connection
, and type a name for the connection.
3. In the
Make New Connection
dialog box, select
Dial-
Up Connection
, and then tap
Next
.
4. Select the down-arrow button next to the
Select a
modem
box, and highlight the name of your modem.
If you do not see your modem listed in the drop-down
list, your modem may not be properly connected to your
P/PC. Make sure that the modem is connected to your
P/PC properly, based on the installation instructions
that came with the modem.
5. Tap
Next
and fill in the phone number you wish to dial.
Tap
Finish
. A new icon appears with the name you
specified in the
Connections
folder. This connection
also appears on the
Start
menu in the
Connections
submenu.
Connecting to your ISP
After you have configured your connection to your ISP, you are
ready to connect your phone line to your modem, and then dial
in. Make sure you connect to the phone line supported by your
modem, follow the instructions provided by the manufacturer.
Most CompactFlash Card modems use analog phone lines.
